top of page

Thames Ultra Heavy Grease 89 is a premium grease designed to protect and lubricate heavy-duty bearings operated at a wide range of speeds in moist operating condition. It is formulated with mixed-base multi-complex thickener and a package of advanced additives to offer exceptional loadcarrying properties, excellent corrosion protection and water washout resistance over a wide range of temperatures. This grease is highly recommended, ultimately, to prolong the service lives of bearings and other greaselubricated components of heavy-duty machineries/equipment in industries such as agriculture, cement, construction, mining, quarrying, etc.

 

EXCEPTIONAL LOAD-CARRYING CAPABILITY: Quality designed to outperform all conventional EP (Extreme Pressure) greases, Thames 89 is formulated with an innovative mixed-base multi-complex thickener with outstanding EP performance. Based upon a mixture of lithium and calcium metal soaps processed with complexing agents, this special thickener offers outstanding lubricity, anti-wear property and load-carrying capability. The EP performance of Omega 89 is further enhanced by the addition of an advanced EP additive. To evaluate the EP performance of lubricating greases, a generally accepted test called “Four Ball (4-ball) Weld Load” test is used. Typically, greases with rating of over 250 kgf in the 4-ball weld load test can be classified as EP greases. Omega 89 out-performs the conventional EP greases by over three times with a rating of not less than 800 kgf. In the market, this exceptional rating is unmatched by 95% of the EP greases without the use of solid additives.

Thames Ultra Heavy Grease 89

220,00£Precio
  • TYPICAL DATA: TEST TEST METHOD TEST RESULT

    Appearance - Smooth, Red

    Specific Gravity - 0.9

    Thickener - Li/Ca Multi-Complex

    Base Fluid - Mineral Oil

    Dropping Point, °C ASTM D-2265 >260

    Worked Penetration D-217 285 - 315

    Four Ball Weld Load, Kg IP 239 (ASTM D-2596) >800

    Water Washout, % Loss @ 38°C ASTM D-1264 <1

    Copper Corrosion IP 112

    Pass dN Factor @ 100°C: Deep groove ball bearing - 400,000 Spherical/cylindrical bearing - 200,000

    Recommended Operating Temperature Range, °C - -30 to 150

    The characteristics given above are typical of current production only and slight batch to batch variations should be expected.

No hay reseñas todavíaComparte tu opinión. Deja la primera reseña.
bottom of page