SILVERSOL is a Bio-stable water-mix cutting fluid forming a milky emulsion when mixed with water.
SILVERSOL is suitable for a wide range of non-hazardous machining operations where sump life can be improved in comparison to more conventional soluble oils.
It contains high lubrication and anti-rust properties. A generous proportion of bactericide is included in this package and is designed to protect against infection and to retain the quality of the coolant as long as possible.
Appearance of Concentrate Amber Liquid
Specific Gravity @ 20oC 0.920
pH (5% dilution in deionised ) 9.2
Anti-Corrosion by IP287 3% Break Point
Refractometer Correction factor 1.0
Produces a high degree of machine Tool Lubrication
Suitable for a wide range of machining applications
Good Sump Life characteristics
Low unit cost
General machining on low to medium tensile ferrous and non-ferrous materials
MACHINE OPERATION ALUMINIUM MILD MEDIUM.
COPPER, STEEL TENSILE
Turning, Milling, Drilling, Boring: 30 - 1 20 - 1 15 - 1
Thread Cutting, Tapping, Broaching: 15 – 1 10 - 1 10 - 1
Gear Hobbing, Shaving: 20 - 1 15 - 1 10 - 1
Grinding: 40 - 1 30 - 1 20 - 1
N.B. Emulsion must be prepared by pouring the soluble oil onto water with agitation to ensure complete dispersion.
The life and performance of any water–mix metalworking fluid is affected greatly by external factors such as water quality, atmospheric contamination and ingress of machine oils etc Maximum benefit and lowest operating costs are achieved were correct monitoring and control is applied.
The above is for information only and shall not involve the Company in any liability whatsoever.
top of page
bottom of page