PRODUCT NAME                Pressair Compressor Oils

 

PRESSAIR 10                   PRESSAIR 20                   PRESSAIR 30                  PRESSAIR 40

 

PRODUCT DESCRIPTION

 

Pressair oils are a range of air compressor lubricants made form solvent refined high quality paraffinic stock oils having narrow cut distillation ranges.

 

They contain ANTI-WEAR, ANTI-RUST, and ANTI-OXIDATION additives.

Available in four viscosities - SAE 10, SAE 20, SAE 30 & SAE 40.

 

The pressair range of lubricants exceed DIN-51506 VDL requirements.

 

PERFORMANCE LEVELS

 

SPECIAL FEATURES OF PRESSAIR OIL

EXCELLENT RESISTANT TO “LIGHT END STRIPPING”

HIGH RESISTANCE TO OXIDATION & DEPOSIT FORMATION

GOOD PROTECTION AGAINST RUST & CORROSION

GOOD LOAD CARRYING & ANTI-WEAR CHARACTERISTICS

READY SEPARATION FROM WATER

 

USER BENEFITS FROM PRESSAIR OIL

Longer valve cleaning intervals due to LOW DEPOSIT FORMING PROPERTIES

REDUCED RING & CYLINDER WEAR due to good RUST PROTECTION & load carrying characteristics.

Good INTER-COOLER & AFTER-COOLER efficiency due to reduced oil carry over to form deposits which impair heat transfer

REDUCED OIL CONSUMPTION due to VERY GOOD STABILITY

LONGER OIL LIFE  &  LOWER MAINTENANCE COSTS

reduced downtime -  all lead to increased operation profit

 

 

 

APPLICATION

 

Pressair oils are recommended for single and multi-stage air compressors, and are particularly effective for continuous high temperature arduous operation with exhaust temperatures up to 220 Deg.C.

 

They are SUITABLE for both RECIPROCATING & ROTARY type machines - and are RECOMMENDED for use in MOST COMPRESSOR OIL APPLICATIONS. 

 

In crosshead type reciprocating machines Pressair Oils are suitable for crankcase lubrication.

 

PROPERTIES

 

Due to the narrow cut distillation range and additive treatment Pressair Oils have high resistance to oxidation and deposit formation as measure in th DIN 51352-1 OXIDATION TEST and PNEUROP OXIDATION TEST following DIN 51353-2.

 

Pressair 10,20,30 & 40 exceed the Quality Levels VD-L-22,   46 and 100 in DIN 51506 which specifies the Requirements and Safety Aspect for Selection and Testing Air Compressor Lubricants.

 

These lubricants also provide good protection against rust, have good load carrying characteristics and separate readily from water.

 

TYPICAL CHARACTERISTICS

 

                                P R E S S A I R     O I L S

                                SAE         SAE     SAE         SAE

                                    10        20        30            40

                                    TYP     TYP     TYP         TYP

                                                                                            TEST METHOD- ALL

KV @ 40 Deg.C          30.0     68.0     95.00     150.00           IP     71

VISCOSITY  INDEX 95         95        95          100.00           IP     226

RD @ 15DEG.C         0.880 0.885     0.885      0.885            IP    160

                                                           

THE ABOVE IS FOR INFORMATION ONLY AND SHALL NOT INVOLVE THE COMPANY IN ANY LIABILITY WHATSOEVER.

PRESSAIR 20 Compressor Oil

£52.50Price
Pack Size Selection

    Contact Us

    Thames Lubricants Ltd

    Product & Research Centre

    Garner Street, S-O-T, Staffs, ST4 7DE.    

    Tel: 01782 745678

    sales@thameslubricants.co.uk 

    Call us  01782 745678

    All calls are recorded

    2020