PRODUCT DATA SHEET
   
 
PRODUCT NAME :  HAMMER GREASE                PRODUCT CODE  0253/0272
 
HAMMER GREASE is specially developed using a blend of semi-synthetic base oil manufactured with high temperature thickener containing a high level of graphite to extend lubrication periods. It is designed particularly for hydraulic hammer lubrication, pin and bush type of applications, on large earth moving and general off-road heavy plant machinery.
HAMMER GREASE is enhanced by the addition of laminar lubricating solids, and it’s adhesive properties resist water wash off.
This product has also found use in the lubrication of open gears.
 
FEATURES
 
·       High degree of water resistance
·       Reduced grease leakage tendency
·       Excellent load carrying capability and shock load resistance
·       Good sealing properties in dusty conditions
·       Inherent adhesive nature
 
METHOD OF APPLICATION
 
HAMMER GREASE can be applied manually, or by using a standard grease gun (400gm cartridges available).
As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the bearing manufacturer.
 
TYPICAL PHYSICAL CHARACTERISTICS
Appearance                                                     -        Smooth adhesive grease
Colour                                                             -          Black
NLGI Classification                                           -         2 / 3
Thickener                                                         -        Bentone
Base oil                                                          -        Semi-synthetic
Base oil viscosity @ 40°C (IP71)    cSt              -        1000
Oil separation (IP121)        %                              -      2
Worked Penetration (IP50)                               -         230 to 260
Dropping point (IP132)   °C                               -        >260
Water Washout (ASTM D1264) @ 38°C                      -        2
                                           79°C  %                -        5
Four Ball Weld Load (IP239)    kgs                    -        500
Graphite content    %                                         -         10
Operating temperature range                            -         -5°C to +150°C
 
 The content of this data sheet is given in good faith but without warranty.             (Oct 09)

Hammer Grease

Od 10,00£

Bez DPH

Pack Size

Množství

MATERIAL SAFETY DATA SHEET

PRODUCT CODE 60142

LAST REV. DATE : 26/07/16

SHEET 1 of 2

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY NAME

PRODUCT NAME:	QUARTZ ULTRA HIGH TEMP. 2
PRODUCT CODE:	60142
COMPANY NAME:	Thames Lubricants Ltd Garner Street Stoke On Trent Staffs ST4 7DE

2. HAZARDS IDENTIFICATION

MAIN HAZARDS:

Not classified as hazardous

3. COMPOSITION/INFORMATION ON INGREDIENTS

HAZARDOUS INGREDIENTS:

Non- Hazardous substance 1 – 100%

4. FIRST AID MEASURES

EYE CONTACT

Wash out eye with plenty of water. Obtain medical attention if soreness

or redness persists

SKIN CONTACT:

Wash skin with soap and water. If grease has been injected under the skin, seek Medical advice immediately.

INGESTION:

Do not induce vomiting. Obtain medical attention

5. FIRE FIGHTING MEASURES

EXTINGUISHING MEDIA:

Use water Spray to cool containers. Use foam, dry chemical, carbon dioxide or suitable extinguishing media..

EXPOSURE HAZARDS:

This product may give rise to hazardous fumes in a fire.

PROTECTION FOR FIRE- FIGHTERS:

Wear self-contained breathing apparatus.

6. ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS:

Refer to section 8 for personal protection details.

SPILLAGES:

Transfer into suitable containers for recovery or disposal.

7. HANDLING AND STORAGE

HANDLING:

Avoid direct contact with the substance.

STORAGE:

Store in cool well ventilated area

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

PROTECTIVE EQUIPMENT:
HAND PROTECTION:	PVC gloves
EYE PROTECTION:	No specific measures necessary
BODY PROTECTION:	Normal work wear
RESPIRATORY PROTECTION:	Not normally required

PRODUCT CODE: 60142

LAST REV. DATE : 26/07/16

SHEET 2 of 2

QUARTZ ULTRA HIGH TEMP. 2

9. PHYSICAL AND CHEMICAL PROPERTIES

	PHYSICAL STATE:	Smooth Adhesive Grease
	COLOUR:	Black
	ODOUR:	Odourless.
	MELTING POINT (°C):	Melts above 200
	FLASH POINT (PMCC) (°C):	Exceed 200.
	SOLUBILITY IN WATER (KG/M3):	Insoluble.
	DENSITY (KG/M3):	0.980 (Measured as kg/litre)
	AUTO-FLAMMABILITY (ºC):	Above 200.

10. STABILITY AND REACTIVITY

	STABILITY:	Stable under normal conditions.
	CONDITIONS TO AVOID:	Heat.
	MATERIALS TO AVOID:	Strong oxidising agents.
	HAZARDOUS DECOMPOSITION PRODUCTS:	Combustion will generate: smoke, carbon dioxide and carbon monoxide

11. TOXICOLOGICAL INFORMATION

ACUTE TOXICITY

Low order of acute toxicity.

12. ECOLOGICAL INFORMATION

MOBILITY:

Non volatile. The product is poorly absorbed onto soils or sediments.

PERSISTENCE & DEGRADABILITY:

Only slightly biodegradable.

BIO-ACCUMULATION:

Product is not expected to bio-accumulate.

13. DISPOSAL RECOMMENDATIONS

PRODUCT DISPOSAL:

Dispose in a regulated landfill site or other method for hazardous or toxic waste. Dispose of in accordance with local and national regulations.

14. TRANSPORT INFORMATION

	UN CLASS:	Not classified.
	ADR/RID – CLASS:	Not classified.
	IMDG – CLASS:	Not classified.
	IATA – CLASS:	Not classified.

15. REGULATORY INFORMATION

HAZARD SYMBOLS:

R PHRASES:

No significant hazard.

NONE.

S PHRASES:

NONE.

16. OTHER INFORMATION

PRODUCT USE:

For industrial use only. Lubricant.

EC Directive 91/155/EEC defining the laying down and detailed arrangements for the system of specific information relating to Dangerous Preparations Directive – 2001/58/EC. EC Directive 88/379/EEC relating to the classification, packaging and labelling of dangerous preparations.

To the best of our knowledge, the information contained herein is accurate. Although certain hazards may be described we cannot predict that these are the only hazards, or combination of hazards, that may exist in a workplace. This MSDS, therefore, forms a component only of a risk assessment carried out by, or on behalf of the user.

Zatím žádné hodnoceníPodělte se o své myšlenky. Napište první hodnocení.

Hammer Grease

Health & Safety