Quartz SAC FOOD PLUS 2 grease is designed to cover a wide range of food safe applications, encompassing extremes of temperature, wet and saturated environments, heavily loaded applications and where there is a presence of dust and other contaminants. Quartz FOOD PLUS 2 greases contain extreme pressure / anti-wear additives and PTFE to provide a high degree of load carrying performance. Suitable for all plain and anti-friction bearings as well as sliding surfaces. The FOOD PLUS range of greases is available in NLGI Nos. 2, 1 and 00.
Outstanding Features
· Wide performance characteristics enable standardisation to one product for most food safe applications
· Provides long term lubrication at high temperatures, extending lubrication intervals
· Excellent anti-wear performance prolonging component life
· Exceptional degree of water resistance providing lasting lubrication and protecting against corrosion
Quartz SAC Food Plus 2
LAST REV. DATE : 13/03/16 SHEET 1 of 3
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY NAME
PRODUCT NAME:
Quartz White Food Machinery Grease
PRODUCT CODE:
60192
COMPANY NAME:
THAMES LUBRICANTS LTD
Garner Street
Stoke on Trent
ST4 7DE
Tel: +44 (0)1782 745 678
Fax: +44 (0)1782 848 437
e-mail : enquiries@thameslubricants.co.uk
2. HAZARDS IDENTIFICATION
Classification of the substance mixture
Not Classified
Classification according to Directive 67/584EEC
Not Classified
Classification according to directive 1272/2008
(GHS/CLP)
Not Classified
Label Requirements
Hazard pictograms
N/a
Signal word
N/a
Hazard statement
N/a
Precautionary statements
Prevention.
N/a
Response.
N/a
Storage.
N/a
Disposal
N/a
Substance meets the criteria for PBT according to
Regulation (EC) No. 1207/2006, Annex XIII
No
Substance meets the criteria for vPvB according to Regulation (EC) No. 1207/2006, Annex XIII
No
3. COMPOSITION/INFORMATION ON INGREDIENTS
HAZARDOUS INGREDIENTS:
Non Hazardous 1-100%
Blend of PAO with multi functional additives
All components Permitted under US 21 CFR 178.3570,178.3620 and 182 for use in Incidental food contact. H1
4. FIRST AID MEASURES
EYE CONTACT
Wash out eye with plenty of water. Obtain medical attention if soreness
or redness persists
SKIN CONTACT:
Wash skin with soap and water. If grease has been injected under the skin, seek Medical advice immediately.
INGESTION:
Do not induce vomiting. Obtain medical attention
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA:
Use water Spray to cool containers. Use foam, dry chemical, carbon dioxide or suitable extinguishing media..
EXPOSURE HAZARDS:
This product may give rise to hazardous fumes in a fire.
PROTECTION FOR FIRE- FIGHTERS:
Wear self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS:
Refer to section 8 for personal protection details.
SPILLAGES:
Transfer into suitable containers for recovery or disposal.
7. HANDLING AND STORAGE
HANDLING:
Avoid direct contact with the substance.
STORAGE:
Store in cool well ventilated area
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
PROTECTIVE EQUIPMENT:
HAND PROTECTION:
PVC gloves
EYE PROTECTION:
Wear approved safety goggles
BODY PROTECTION:
Normal work wear
RESPIRATORY PROTECTION:
Not normally required
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE:
Smooth adhesive Stiff Grease
COLOUR:
Off White
ODOUR:
Odourless.
MELTING POINT (°C):
Melts above 150
FLASH POINT (PMCC) (°C):
Exceed 200.
SOLUBILITY IN WATER (KG/M3):
Insoluble.
DENSITY (KG/M3):
0.82-0.85 (Measured as kg/litre)
AUTO-FLAMMABILITY (ºC):
Above 200.
10. STABILITY AND REACTIVITY
STABILITY:
Stable under normal conditions.
CONDITIONS TO AVOID:
Heat.
MATERIALS TO AVOID:
Strong oxidising agents.
HAZARDOUS DECOMPOSITION PRODUCTS:
Combustion will generate: smoke, carbon dioxide and carbon monoxide
11. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY
Low order of acute toxicity.
12. ECOLOGICAL INFORMATION
MOBILITY:
Non volatile. The product is poorly absorbed onto soils or sediments.
PERSISTENCE & DEGRADABILITY:
Only slightly biodegradable.
BIO-ACCUMULATION:
Product is not expected to bio-accumulate.
13. DISPOSAL RECOMMENDATIONS
PRODUCT DISPOSAL:
Dispose in a regulated landfill site or other method for hazardous or toxic waste. Dispose of in accordance with local and national regulations.
14. TRANSPORT INFORMATION
UN CLASS:
Not classified.
ADR/RID – CLASS:
Not classified.
IMDG – CLASS:
Not classified.
IATA – CLASS:
Not classified.
15. REGULATORY INFORMATION
HAZARD SYMBOLS:
R PHRASES:
No significant hazard.
NONE.
Quartz SAC Food Plus 2
Description
Quartz SAC FOOD PLUS 2 grease is designed to cover a wide range of food safe applications, encompassing extremes of temperature, wet and saturated environments, heavily loaded applications and where there is a presence of dust and other contaminants. Quartz FOOD PLUS 2 greases contain extreme pressure / anti-wear additives and PTFE to provide a high degree of load carrying performance. Suitable for all plain and anti-friction bearings as well as sliding surfaces. The FOOD PLUS range of greases is available in NLGI Nos. 2, 1 and 00.
Outstanding Features
· Wide performance characteristics enable standardisation to one product for most food safe applications
· Provides long term lubrication at high temperatures, extending lubrication intervals
· Excellent anti-wear performance prolonging component life
· Exceptional degree of water resistance providing lasting lubrication and protecting against corrosion
Directions for Use
Quartz FOOD PLUS 2 can be applied by hand, or by using a standard grease gun (400g cartridges are available), or via a central lubricating system capable of pumping an NLGI No. 2 grease As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application. Likewise, as a general rule, take care not to overlubricate and apply the quantity of grease recommended by the bearing manufacturer
Technical Data
Appearance - Off White tacky grease NLGI Classification -2 Thickener - Aluminium complex
Drop point (IP 132) - > 230oC
Base oil - A Blend of Synthetic Oils Base oil
viscosity @ 40 °C, cSt - 300
Base oil viscosity @ 100 °C, cSt - 31
Solid lubricant - White lubricating solids and PTFE
Copper corrosion (IP112) - Negative
Water washout (ASTM D1264) @ 38 oC - < 1% max.
Dynamic corrosion resistance (EMCOR) (IP 220) - 0:0
Shell Four Ball (IP239) Weld load - 400kg
dN factor - 500,000
Operating temperature range - -50oC to +170oC
The content of this data sheet is given in good faith but without warranty.
